How To Correct A Leaning Tree With Support
Our other original tree – the Kingston Black – has unfortunately suffered from the gusts of winds that rip through our exposed allotment site and has subsequently developed an unfortunate lean. When planting a tree, there are a couple of different schools of thought when it comes to staking and tree support. Some say that staking provides the tree with support until its anchor roots develop. Others claim that the to-and-fro motion of a free swaying, unstaked tree will strengthen the roots, leading to a sturdy tree. We went for the tough love approach, forgoing the stake because a) we were in a rush to plant the trees and b) we forgot to buy stakes. This technique worked well for our other apple trees we planted, but the windy conditions up at the plot proved a bit too much for our beloved Kingston Black.
Before the next stormy spell knocks it flat, we have attempted to make amends for our neglectfulness and offered up maximum tree support by both staking and guiding. Here are our suggestions for how to do both:
Guiding a tree
First off, we’re going to guide rope the tree. Guiding is the easiest, most secure way to offer support to trees that are already established – just the ticket then for our wonky tree. Staking alone might be enough to rectify the problem, but we are going for a ‘belt and braces’ approach.
- Choose your rope. You want to use something at least 4mm thick that doesn't stretch under duress. Cut a 30cm length of old hose and thread your guide rope through the middle. (Or slice open the side of the pipe and retro-fit it if you forget. Like us) This will prevent the rope biting into the tree and damaging the bark.
- Gently raise up your tree (this is easier with two people, so enlist help from a pal) to a point where the trunk is as vertical as you dare. A cracking, splitting sound at this point is bad news…
- Wrap your rope around the trunk and fix it to the ground with a sturdy peg. You’ll want to peg it out at a distance of at least four foot from the base of the trunk for maximum stability. Be aware of the trip risk you are creating, so try to use a bright coloured guide rope to head off any potential accidents.
Staking a tree for support
There are various methods of staking a tree, but because we want to avoid damaging the established roots, we’ll be using the angled stake method.
- Inspect the stake for knots and cracks before purchase. Any faults will be magnified when you hammer it into the ground, especially if the earth is frozen or rocky.
- Angle your stake at 45 degrees, with the blunt end pointing into the lean. Upright stakes are usually positioned between the tree and the most likely direction of the wind, to prevent the tree rubbing up against the stake. Because our tree is leaning at such an acute angle, we want the stake to be pushing the tree back, like a rugby prop forward leaning into a scrum (or a drunk leaning on a lamp post)
- Secure the tree to the stake with a soft, rubber tree tie. Remember that ties need to be loose enough to allow for growth, so make sure you go for one that you can adjust easily.
We plan to leave the stake and guide in for at least one growing season, by which time we expect the roots to have spread sufficiently to enable the tree to stand upright without our woody/ropey additions and be as magnificent as the others!
Have you ever tried supporting a tree in this way before? Or do you have your own suggestions for making sure a tree is sturdy and straight? We’d love to hear your ideas – leave a comment below.
* Was it a rampaging badger? A jealous allotment neighbour? Or rocky undersoil conditions? We’ve yet to get to the bottom of it...
The Two Thirsty Gardeners, Rich and Nick, are bloggers who love gardening, eating and drinking in equal measure! They love to share tales from their allotment including their experiments turning the spoils of their crops into alcohol, both the good and the bad!
To find out more about Rich and Nick, click here.
THANK YOU FOR VISITING THE STIHL GB BLOG
Here you’ll be able to find useful seasonal advice from experts and guest writers, along with the latest news from the world of STIHL and the great outdoors.
In addition, we’ll keep you informed about our latest products and how to make the most of your tools – all so that you can make the most of your outdoor space.
If you love Christmas, then you’re sure to love indulging in a good festive light display, or getting into the spirit with a visit to Santa. In recent years, many gardens around the country have upped their festive game and... Read more →
RHS Chelsea Flower Show is the place to be and be seen in May if you are a keen gardener. Even if you’re not very green-fingered, there is still plenty to inspire you with perfect plants and gorgeous gardens around... Read more →
For the 14 th year running, STIHL will be sponsoring the ARB Show, and we can’t wait for the annual celebration of the science of trees. It’s the 20 th anniversary of the event and it looks set to be... Read more →
We began working with expert chainsaw carver Simon O’Rourke in 2017 when he joined us at the Arb Show to do a wood carving demonstration. For us, he was an obvious choice for a partnership as he is the best... Read more →